Tomb Raider Error Steam Must be Running

Tomb Raider error Steam must be running is common among PC users. This error can easily be rectified by performing troubleshooting steps given below.

Troubleshooting Steps

·         Check System Requirements
·         Install steam on your system
·         Check the version of DirectX
·         Uninstall & Reinstall Steam and Tomb Raider
·         Disable Firewall Protection

Before you undertake the steps, it is recommended you optimize steam using the GAME BOOST feature of RegInOut. This initiates and apply an extreme gaming profile on system and can easily improve steam performance. Download Intel Software Partner, RegInOut from this link:

 

ad-468by60

 

Check System Requirements

Before you start troubleshooting Tomb Raider error Steam must be running. You need to check the minimum system requirements. Here are PC requirements for the game.

·         Operating System: Windows XP SP3, Windows Vista, Windows 7, Windows 8
·         Graphics Card: 512 MB
·         DirectX: DirectX 9 or above
·         RAM: 1 GB Windows XP, 2 GB or above for Vista and later versions
·         Processor: Intel Core2 Duo 1.86 GHz, AMD Athlon 64 X2 2.1 GHz,
·         Storage: 4 GB of internal Storage

Install Steam on your system

In fact Steam is legitimate and trustable service for games on PC. To install Steam on your system, follow the steps given below.

1.       Open your browser
2.       Visit http://www.store.steampowered.com
3.       Download and install Steam to get started
4.       You need to log into the Steam before playing Tomb Raider
5.       Use your activation key to register Tomb Raider to Steam account

Check the Version of DirectX

To check the version of DirectX on your system, follow the instructions given below.

1.       Open Start
2.       Type “dxdiag” without quotes in search box
3.       Now click on the System Tab
4.       Check the DirectX version under System Information
5.       If you have an earlier version of DirectX, just visit Microsoft’s Downloads
6.       Download the latest version

Uninstall & Reinstall Steam and Tomb Raider

Oftentimes uninstalling and reinstalling both Steam & the game solves your problem. Follow the steps given below to uninstall and reinstall Steam & Tomb Raider.

1.       Open Start
2.       GO to Control Panel
3.       Click on Uninstall a program
4.       Click on Steam | Uninstall
5.       Now click on Tomb Raider and uninstall this program too
6.       Restart your system
7.       Download Steam and Tomb Raider again

Disable Firewall Protection

Sometimes your Firewall is conflicting with the game. Disable Firewall protection using steps given below.

1.       Open Start
2.       Type Firewall in Search Box
3.       Click on Windows Firewall with Advanced Security
4.       Click on Windows Firewall Properties under Public Profile
5.       Click on Firewall State | Turn OFF
6.       Click on Apply & OK

ULTRA4 Offroad Racing App Review

ULTRA4 OffRoad Racing is an adventure racing app that is bound to cast a spell on you during gameplay. You are going to get that feeling as if you were actually sitting in the driver’s seat and feeling the heat of the extremely tough terrain as well as the pressure of reaching the finish line before other racers. The graphics could had been a lot better though, but they aren’t that bad either. All in all a fine effort at simulating what goes on in an actual race. Available for only $ 1.99

Download: ULTRA4 Offroad Racing (Android) and ULTRA4 Offroad Racing (iOS)

Continue reading “ULTRA4 Offroad Racing App Review”

Fix WII Error 51330

Wii error 51330 appears while logging-in to an Internet connection. No websites open nor downloads start. This article is a complete solution to repair this problem.

Wii Error Code 51330

Troubleshooting Steps

Set Default IP Address
Disable Firewall Protection
Choose Manual Setup
Unplug and Re-plug your Router

Set Default IP Address

In your case the default Nintendo WII DNS Server IP Address could be changed. It could be changed by your Internet Service Provider. Restore the default IP Address.

  1. Go to System Settings.
  2. Select Internet Option from Page 2.
  3. From Internet Option choose Connection Settings.
  4. Select the inactive connection which is marked with red border.
  5. Now choose Change Settings.
  6. Click the blue arrow and select “Auto Obtain IP Address” option.
  7. Select “No” option.
  8. Click on Advanced Settings.
  9. Now contact your service provider and obtain an IP Address.
  10. Enter your default IP Address and then click OK.
  11. Enter Subnet Mask in the appropriate field and click OK.
  12. Click on “Default Router” and provide the default gateway address.
  13. Click Confirm. Tap right arrow.
  14. You would see auto obtain DNS page. Select No.
  15. Tap Advanced Settings
  16. Provide Primary DNS and Secondary DNS.
  17. Click Confirm | Save.

Disable Firewall Protection

WII error code 51330 appears when the firewall software blocks Internet connection. Temporarily disable your firewall protection as shown below:

  1. Click WAN Setup | Security.
  2. Disable Firewall protection and log-in to your Internet.

Choose Manual Setup

Selecting Manual setup to troubleshoot WII error code 51330. Here’s how:

  1. Click Start.
  2. Select All Programs | Accessories.
  3. Right-click Command Prompt.
  4. Select Run as Administrator.
  5. Type following command and press ENTER:

IPCONFIG/ ALL
EXIT

Unplug and Replug your Router

There could be power cycling issue. Unplug and replug your router to get rid of this issue.

Resolve Tomb Raider Errors

Tomb Raider is a well-known adventurous game that attracted worldwide gamers. Recently a lot of stability issues were discussed on Internet forums. The game fails to load with error, some errors appear during gameplay. The most common errors were Tomb raider error Direct3d, fatal error: CDRM file corrupt and out of memory error. In this article you’ll learn how to get rid of such errors.

Verify Minimum System Requirements

Your computer must meet the minimum system requirements specified in ReadMe documentation.

  • Operating System: Microsoft Windows 8/ 7/ Vista/ XP (32/ 64 bit)
  • CPU: Intel Core 2 Duo 1.86/ AMD Athlon 2.1 GHz
  • RAM: 2 GB
  • Video Card: Any video card compatible with DirectX 9
  • Video Memory: 512 MB
  • Free Disk Space: 10 GB
  • Software: Microsoft DirectX 9
  • Other: Internet connectivity

Change Aspect Ratio, Render API

Configure your Registry properly. Most of the time bad Registry references cause your computer to display an error during game runtime.

Tomb Raider Registry Settings

  1. Press Windows Key + R simultaneously to open Run dialog box.
  2. Type RegEdit in Open textbox; press ENTER
  3. Locate the following sub key: HKEY_CURRENT_USER | Software | Crystal Dynamics | Tomb Raider | Graphics
  4. Double click AspectRatio; replace existing value with 16000 in decimal. That is to say, your desired ratio will be 16:10.
  5. Click OK
  6. Double click RenderAPI string; replace its value with 9. Click OK.
  7. Exit out of the screen.
  8. Restart your computer.

Change Graphics Quality Settings

Change settings related to hair quality of game characters, exclusive fullscreen and so on.

  1. Go to Launcher screen, select Options.
  2. Go to Basic tab and then uncheck “Exclusive Fullscreen” box.
  3. Go to Advanced Settings and set “Hair Quality” to Normal.
  4. Save your settings, exit out of the screen.

Download Windows Update KB971512

This is a crucial update that usually comes when you update your system. However, if your Windows Update is disabled you may have to manually download this update. This update contain a bug fix to resolve Tomb Raider errors. Download it from here.

Microsoft Download Center

Verify Integrity of Game Cache

Game cache corruption is another important reason. Cache contains most frequently used game files. Verify integrity of game cache, overwrite corrupt cache contents.

  1. First of all you need to close all active programs.
  2. Double click Steam desktop shortcut and launch it.
  3. Click Library section | Tomb Raider.
  4. Right-click your game, select Properties.
  5. This opens up a new dialog box. Click Local Files tab and then Integrity of Game Cache button.
  6. Go ahead and specify that you want to check integrity of game cache to launcher.
  7. It will take a few minutes, you need to wait until process completes.
  8. Finally, a new dialog box will appear. Please check-up the checkbox named “Windows will automatically exit when above process completes”.

Update Drivers

Outdated drivers is a potential reason behind game errors. Keep your system drivers up-to-date on regular basis to ensure smooth and speedy gameplay without encountering errors. Follow the steps given below to update drivers:

Update Driver Software

  1. Click Start button
  2. Go to Search box and type “Device Manager”.
  3. Choose the device you want to update. Double-click selected Device.
  4. You will see a dialog box.
  5. Click Driver tab and then Update Driver button.
  6. Follow the on-screen wizard.
  7. Repeat above process for each device driver you would like to update.

Launch Game in Window Mode

If you’re receiving an error during full screen mode, try setting up windowed mode.

  1. Click the Start button.
  2. Go to All Programs and then Tomb Raider.
  3. Launch the game and go to the Game Menu.
  4. Set Graphics Options=> Window Mode.

Fix Windows Registry Errors

Windows Registry is the most neglected part of your system. Over a period of time Registry gets accumulated with junk entries, incorrect DLLs/ ActiveX references. Fix all these issues to immediately repair Tomb Raider loading/ runtime errors. Download Reginout System Utilities now.